BestReviews is reader-supported and may earn an affiliate commission. Details
This auto-shop quality transmission jack boasts a 2-stage lift system that hits an impressive maximum height of 76.5 inches.
This auto-shop quality transmission jack boasts a 2-stage lift system that hits an impressive maximum height of 76.5 inches.
Foot pedal rapidly raises mounting head, thanks to air-assist. Hand-pump hydraulic secondary stage for more exact operator control. Easy-grip knobs make it simple to adjust mounting head. Safety chain. Wide leg base with 4-inch polyurethane swivel wheels. Brakes on 2 wheels. Lowest position is 7.625 inches; with a 76.5-inch maximum height. Maximum forward tilt 42 degrees, 46 degrees back. Side tilt 12 degrees each direction.
Hydraulic fluid may leak from time to time, so be sure to check levels.
Responsive, steady tilting action makes for easier transmission jobs. Just be sure to keep an eye on the hydraulic fluid level.
Responsive, steady tilting action makes for easier transmission jobs. Just be sure to keep an eye on the hydraulic fluid level.
Universal mounting head with adjustable brackets. Pump handle rotates 360 degrees. Head tilts front to back and side to side. Safety chains hold transmission. Easy to position under vehicle thanks to wide wheel base, 4 swivel casters, and 2 handle grips. Safety overload prevention. Takes up 43 by 42 inches of floor space. Flash-chromed ram keeps rust out of hydraulic system. Height ranges from 6.5 to 29.5 inches. Solid construction.
Hydraulic system may leak.
A good pick for home use, this jack's cradle is best suited for automatic transmissions, but can be adapted for use with standard transmissions.
A good pick for home use, this jack's cradle is best suited for automatic transmissions, but can be adapted for use with standard transmissions.
Roll-under transmission jack. 1,000 pound capacity. Hydraulic lifting. 360-degree rotating handle. Saddle allows for full side-to-side and front-to-back adjustment. Reinforced base with a wide stance. Factory tested for safety and reliability. Steel swivel bearing casters Minimum clearance of 8.66 inches. Maximum height of 22.64 inches.
The provided chains are not of the best quality. Jack occasionally fails when loaded.
Many use this strong, versatile jack for transmission work on both unibody and traditional frame vehicles. Just keep in mind that it's a multipurpose tool, so its head doesn't pivot like a traditional transmission jack.
Many use this strong, versatile jack for transmission work on both unibody and traditional frame vehicles. Just keep in mind that it's a multipurpose tool, so its head doesn't pivot like a traditional transmission jack.
4,000-pound lifting capacity. Holds vehicles with lift points as low as 8.625 inches. Maximum height is 18.625 inches. Bottlejack and jackstand in one. Removable lift saddle and padded lift rails. Can adapt to multiple types of vehicle frames like cars, trucks, and ATVs. Locking safety bar keeps jack in place once raised; no need for jack stands. Meets or exceeds ANSI standards.
Better for taking a transmission out than putting one back in; mostly because it does not have a pivoting head.
This pedestal-style transmission jack is intended for use in combination with in-ground and above-ground lifts.
This pedestal-style transmission jack is intended for use in combination with in-ground and above-ground lifts.
Half-ton capacity pedestal-style jack. Lift range of 49.6 to 68.7 inches. Steel and dipped-enamel finish. For use with in-ground and above-ground lifts. Adjustable saddle. Safety chain. 4-leg base with 3-inch steel wheels. Wheels swivel a full 360 degrees on ball bearing casters. Release valve.
Look for something taller if you are much over 5-foot 8-inches tall.
We recommend these products based on an intensive research process that's designed to cut through the noise and find the top products in this space. Guided by experts, we spend hours looking into the factors that matter, to bring you these selections.