BestReviews is reader-supported and may earn an affiliate commission. Details
A solidly built, 25-250 foot-pound 1/2-inch torque wrench that ships pre-calibrated (to +/- 4% accuracy).
A solidly built, 25-250 foot-pound 1/2-inch torque wrench that ships pre-calibrated (to +/- 4% accuracy).
This torque wrench features a dual range so you can measure in foot-pound or newton-metre. The device produces a positive click when torque is reached so you can tighten with confidence. Purchase includes a storage case, manual, and conversion chart.
Some users have noted that the tool might not be as accurate when executing lighter duty tasks.
A basic tool with several practical features. This affordable "all-rounder" is the best deal on the market.
A basic tool with several practical features. This affordable "all-rounder" is the best deal on the market.
Compact and lightweight. Few durability concerns. Great customer support.
Rare complaints of breakage.
An affordable 1/4-inch torque wrench that is manufactured using durable chromium-vanadium steel.
An affordable 1/4-inch torque wrench that is manufactured using durable chromium-vanadium steel.
This is a compact model that measures just 10.6 inches long. The wrench comes with a case, a 1/4-inch to 3/8-inch driver adapter, and a 1/4-inch drive extension bar. The thick, knurled, non-slip handle provides a sturdy grip.
It is important to check the calibration of the wrench when you receive it to make sure it is accurate.
A torque wrench with a digital screen that allows you to be extremely precise when setting the torque.
A torque wrench with a digital screen that allows you to be extremely precise when setting the torque.
This tool has a 45-tooth reversible ratchet and converts between 4 different measurements. The handle features an easy-to-use adjustment system that can be quickly accessed. Even though it is digital, the wrench still clicks when torque is reached.
Setting the torque requires a delicate touch because the adjustment is very sensitive.
A compact, lightweight torque wrench that gets points for both quality and aesthetics.
A compact, lightweight torque wrench that gets points for both quality and aesthetics.
At just 10 inches, this is one of the most compact designs available. The tool is manufactured for tasks ranging from 18 to 124 inch-pounds. The ratcheting 3/8-inch drive is reversible and can be used for either clockwise or counterclockwise tasks.
Some consumers feel this model is a little on the pricier side, but top tools cost more.
We recommend these products based on an intensive research process that's designed to cut through the noise and find the top products in this space. Guided by experts, we spend hours looking into the factors that matter, to bring you these selections.
Over-tightening nuts and bolts is a constant problem for DIYers and professional mechanics alike, on everything from the cylinder head of a semi, to the gear train of a racing cycle.
The solution is a torque wrench. A precision instrument designed for one job: making sure your nuts and bolts are done up with exactly the right amount of force.
The challenge is identifying the torque wrench that’ll best meet your needs.
If you're an engineer or mechanic you might have job-specific requirements. If you're not a pro, but like to work on your own vehicles, you'll probably want a good all-around wrench.
BestReviews is here to help you choose.
Many people will be familiar with what we think of as a "standard" torque wrench – those that look much like a ratchet-drive socket wrench. There are a couple of others:
Preset torque wrenches: Also called torque drivers. Often small, gripped in the palm of the hand. They are set for a single torque amount. Popular with cyclists because of their light weight and portability.
Deflecting beam torque wrench: Available in a wide variety of ranges, from light engineering to heavy industrial. A long beam runs from the head where the socket is attached, down to a scale by the grip. The deflection of this beam, left or right, indicates the amount of torque. It's a common and popular tool in many industries, but the socket is fixed. There's no ratchet action, so it can be difficult to use without plenty of space.
The ones most of us recognize are known as micrometer torque wrenches, though there are some differences.
Along with the different types of torque wrench, there are also different drive sizes. A 1/2" drive is common among tools designed for automotive use. Also commonly available are 1/4", 3/8" and 3/4" drives.
The most common type available. An audible click, which can also be felt by the operator through the grip, warns when the required torque is reached.
Pros:
Great combination of performance, durability, ease of use and value. Accurate when used properly.
Cons:
If pressure is applied too rapidly, they can over-tighten. Steady pressure is recommended, stopping immediately the first click is heard. It's common for users to think they need to release and apply an extra click "just to make sure." This is incorrect.
Very similar to click wrenches, but with a hinged section – usually near the socket head – that “breaks” when the required torque is reached.
Pros:
Easy to use. Good durability and value. Accurate when used properly.
Cons:
Continued pressure after break will over-tighten. Some people find the 'break' action unpleasant.
Similar in appearance to click wrenches. Have a built-in slip mechanism that releases pressure when the set torque is reached.
Pros:
Easy to use. Will not over-tighten, even with renewed pressure. Guarantees repeatable accuracy that is unaffected by user skill-level.
Cons:
Complex mechanism makes them very expensive.
At first glance, looks like a click wrench with an analog dial, but the dial is there as a guide only, and does not set torque limits.
Pros:
Durable. Can be very accurate.
Cons:
Bulky. Difficult to use. The problem with dial wrenches is that they rely on a high level of operator skill. Most have no audible warning, nor do they break or cam-over. You must watch the dial (not always easy), and react accordingly.
These are the most recent development, and are becoming quite common. An LCD readout displays torque readings. "Traffic light" LEDs and/or audible warnings change as the desired torque level is approached.
Pros:
Can be accurate to four decimal places. They’ve become competitively priced. Some can store data for later comparison and record keeping.
Cons:
No mechanical limit, so again, they rely on user skill. Some concerns over robustness of electronic components. Negligible advantages over mechanical alternatives.
Torque is usually measured in the imperial scale of foot pounds (ft. lbs.), or the metric scale of Newton meters (Nm). Though less common, it can also be measured in inch pounds (in. lbs.) or kilograms per centimeter (kg. cm.).
A mechanical torque wrench will have one or two of these scales (generally foot pounds and/or Newton meters).
Digital models can often be set for all of them, but not always. Don't assume so.
The most popular torque wrench is the click-type, or its digital counterpart, so those are what we have focused on with our recommendations. However, the following rules and characteristics can be applied to any kind of torque wrench.
The accuracy of a torque wrench should be stated as either:
Full Scale (FS), or
Indicated Value (IV).
This can be a little confusing.
A torque wrench that quotes, for example, +/- 4% over the Full Scale, may be less accurate than that at certain points along the scale (commonly lower torque settings). Its overall average accuracy is +/- 4%.
A tool that quotes +/- 4% at any Indicated Value is never more than 4% imprecise, anywhere on its scale. It is more accurate than one that quotes Full Scale.
This distinction isn't always made clear by manufacturers. Whether this is important to you will depend on the precision your job requires. If it's a concern, check with the manufacturer before purchase.
The other important point is that with click-type torque wrenches, accuracy is not quoted over the whole range. 20% to 100% is common. This is because it's difficult for this kind of mechanism to maintain control, and therefore accuracy, at the lower end.
So if, for example, you have a wrench with a range from 25 to 250 foot pounds, it may not achieve its stated accuracy until it gets to 45 foot pounds (20% of range). If you need accuracy at a lower setting, it may be necessary to choose a smaller overall range. A wrench with a range from 10 to 150 foot pounds, should work accurately from 28 foot pounds on up.
Alternatively, dial-type torque wrenches can maintain accuracy from 0% to 100%. However, they are considerably more expensive.
The popular click-type mechanical torque wrench is easy to use, but settings can slip. A locking collar (sometimes called a slip lock) prevents this from happening.
If you're working with high torque settings, a longer handle will enable you to apply pressure more evenly, and so maintain better control. A ratchet head usually allows you to use a larger tool without working space becoming an issue.
Plastic and rubber grips increase comfort, so you're less likely to drop your torque wrench – particularly on cold days.
Some digital models automatically shut down if left unattended, saving battery life. Some have charge indicators. As with all electronic devices, it's an area that changes rapidly, and manufacturers like to add bells and whistles to attract you. Ask yourself whether these things are worth the extra cost, or just gimmicks.
The enormous range of types and sizes of torque wrench makes it difficult to apply general rules when it comes to pricing.
You can get a perfectly good torque wrench for a bicycle for $25. You can get an entry level model for home auto repair at around $40, but a professional mechanic or an engineer requiring more precision might easily spend five times that amount.
Our buying guide should help you narrow down your requirements. Armed with this information, you can compare individual elements until you arrive at the best torque wrench for your particular needs.
If you're working on a complicated job, and you're worried about losing track of where things go as you take them apart, use your cell phone to snap "before" and "during" pics. Then you've got handy reference – in the correct order – when it comes time to put everything back together.
Unless specifically instructed by a manufacturer, never grease or oil nuts and bolts before tightening. You may think lubrication will make them easier to undo next time, but it can stop them tightening properly. If the maker didn't do it, you shouldn't either.
Tighten in three stages. First, wind on the nuts or bolts by hand. They don't have to be tight, you're just getting them on there.
Second, set the torque wrench to half the recommended total. If you have more than one nut or bolt, there's probably a set sequence recommended by the manufacturer. It's important to follow it.
Third, set your wrench to the final torque amount, and follow the sequence again. This ensures even, accurate tightening – particularly important on something like a cylinder head.
Q. Do torque wrenches need specific care or maintenance?
A. A high-quality torque wrench is a durable tool that should give many years of service, but they need some looking after. It varies depending on type, so always follow manufacturer's instructions carefully. Most is common sense. Take care not to drop it when in use. Keep it clean. Store in a separate case so other tools can't damage it. Torque wrenches should be recalibrated periodically – once a year is recommended for a regularly used tool. Again, follow maker's advice.
Q. Do I really need to use a torque wrench on lug nuts? In the auto shop, they just use an air gun?
A. When manually tightening lug nuts, it's surprisingly easy to over do it. It's possible to strip or break wheel studs, and even warp brake rotors. Both are expensive to fix, and the latter has the potential to be extremely dangerous. Use of a torque wrench helps avoid such problems.
While they certainly do use air tools in pro shops, and there's nothing like an impact wrench for breaking a stubborn nut free, the tool has a built-in clutch that's used when replacing your wheel, to avoid over-tightening.
Q. How do I convert foot pounds (ft. lbs.) to Newton meters (Nm) and vice versa?
A. 1 foot pound equals 1.3558 Newton meter, so if you want to turn that around, 1 Newton meter equals 0.7376 foot pounds.
You can do the math from there. Alternatively – and much more easily – you can either look up conversions on the internet (you can print out a chart and tape it to the garage wall), or get a conversion app for your smartphone!
Get emails you’ll love.
Learn about the products you’re wondering if you should buy and get advice on using your latest purchases.